Lubricants & Additives for Multiple Industries

MT-10 Metal Treatment™

The keystone of the Calx Lubtech product line is its anti-friction lubricant additive MT-10®. But this is not your ordinary oil additive – it treats the metal, not the oil. MT-10® is recommended for personal, commercial and fleet automobiles and trucks. When MT-10® is added to the existing oil, the moving metal parts of the engine are polished and sealed, which reduces friction-related heat and wear. MT-10® promotes protection and will not build up or change tolerances.

  • Enhances engine performance
  • Improves fuel mileage
  • Decreases friction & wear
  • Protects internal parts

PL-10 Power-Lift Grease™

PL-10TM is an anti-wear, extreme-pressure, lithium-complex grease with anti-friction additives. PL-10TM is unique because its formulation contains Muscle Metal Treatment MT-10® technology for superior lubrication. PL-10TM treats, seals and protects metal surfaces to dramatically reduce friction-related heat and wear.

  • Continuous operating temperature range: 0oF to 450oF (-17oC to 232oC)
  • Typical dropping point: 525oF+ (273oC+)
  • NLGI #2
  • Reduces operating temperatures
  • Extends equipment life
  • Protects from friction, heat & wear

BlueIce IC-10™

IC-10TM is a gasoline and diesel fuel additive formulated to remove gums, varnishes, carbon deposits and corrosive build up on injectors, carburetors and valves. IC-10TM also disperses water in the fuel for optimal engine performance, while lubricating valves and upper cylinders. Contains Muscle Metal Treatment MT-10® technology.

  • Cleans, lubricates & protects
  • Improves engine performance
  • Completely disperses water
  • Increases mileage

FT-10 Fuel Treatment™

FT-10TM is a fuel additive for gasoline and diesel engines. FT-10TM dissipates moisture in the fuel system to enhance engine power, increase mileage and reduce harmful emissions. For continued performance and protection of your fuel system, use FT-10TM with every fill up. Contains  Metal Treatment MT-10® technology. FT-10TM is also great for improving fuel oil furnace operation and inhibiting bacteria in fuel storage tanks.

  • Cleans & protects fuel system
  • Increases mileage
  • Reduces harmful emissions
  • Complies with Federal sulfur content requirements of diesel engines
  • E-15 compatible

TNT-10 Throat ‘n Throttle™

TNT-10TM cleans the intake manifold, combustion chamber, throttle plates, valves, idle air control (IAC) valve, passages and piston heads of gasoline engines. TNT-10TM is added directly to the combustion chamber through the vacuum system with applicator. TNT-10TM dissolves varnish and carbon build up, lowers harmful emissions, and improves overall engine performance. Professional installation recommended. Contains Muscle Metal Treatment MT-10® technology.

  • Improves engine performance
  • Fast cleaning action
  • Reduces harmful emissions
  • For gasoline engines only

Smoke-Free SF-10™

SF-10TM is an engine oil additive designed to eliminate excessive exhaust smoke caused by worn parts in older or high-mileage vehicles. SF-10TM will also reduce oil consumption and noises from engine valves and lifters. Contains Lubtech Metal Treatment MT-10® technology.

  • Eliminates excessive exhaust smoke
  • Reduces oil consumption
  • Reduces valve & lifter noise
  • Recommended for gasoline & diesel engines

SL-10 Oil Can Lubricant™

SL-10TM is a penetrating oil and heavy-duty spray lubricant that contains Lubtech Metal Treatment MT-10® technology and Power-Lift Grease PL-10TM lubrication. SL-10TM quickly penetrates into hard-to-reach areas to loosen seized and corroded nuts, bolts and other metal mechanisms. SL-10TM also provides long-lasting protection from rust and corrosion – even in highly corrosive and extreme humidity environments.

  • Fast-acting penetrating oil
  • Loosens seized & corroded metal mechanisms
  • Protects against rust & corrosion
  • Heavy-duty lubricating action

MO-10 Moist-Out™

MO-10TM is a light spray lubricant, penetrating oil and demoisturant – all formulated into one superior product. Contains Lubtech Metal Treatment MT-10® technology.

  • Quick moisture displacement
  • Lubricates, penetrates & inhibits rust
  • Protects against corrosion
  • Creeps into hard-to-reach areas

AT-10 Air Tool Oil™

AT-10TM lubricates, cleans and protects piston and rotary type air tools. AT-10TM removes gummy deposits, stops rust, and repels air line moisture and water spray. AT-10TM will give your air tool more power and speed, smoother operation, and improved reliability. Contains Lubtech Metal Treatment MT-10® technology.

  • Lubricates, cleans & protects
  • Stops & inhibits rust
  • Extends tool life
  • Repels air line moisture